Priming is crucial prior to the application of Hotwire self levelling compound. Failing to properly prime the floor will lead to reduced adhesion, reduced flow and greatly increase the inincidence of pin holing in the finished product. Prepour primer should be applied directly from the container and should not be diluted.
Surfaces must be dry, sound, free from dirt, dust and separating agents.
Apply prepour with a short nap paint roller or a paintbrush in a crosswise fashion in and even coat and will cover approximately 15-20m2/litre. The approximate drying time of the primer is 40-60 minutes at 50% relative humidity and 20oC. Further applications can only be done after the first coat has thoroughly dried.
Styrene Acrylic Polymer
Milky, translucent after drying
at least +10o C
Can be laid with pourite
after entire curing (approx. 30 mins. at + 20 oC)
with water before it is dry
frost free, min. 12 months in original unopened packs
Consumption / Coverage
approx. 50-70 mls/m2 or 14-20 m2 per litre (dependent on how porous the substrate is)