• The Heating Company

0800 Heating (432 846)

The Heating Company
Return to Previous Page

In-Concrete Heating Cable 30W/Lm

In-Concrete Heating Cable 30W/Lm

NZ$91.07
Product code: ICH0450

Availability: In stock

Quick Overview:

Hotwire In-Concrete Heating cable is installed in the concrete foundations of new builds and is tied to the reinforcing steel of the concrete foundation.


This system is recommended for areas over 80 m 2.


Please see Product Description and Technical Specification below for further information.

* Required Fields

NZ$91.07
 

Details

30Watts/Lm In Concrete Heating Cable Diagram: 

 1 = Multi Stranded Heating Conductor

 2 = Conductor Insulation 0.5mm RTI XPLE (natural)

 3 = Return Conductor AWG 20/7/28 TPC (0.5mm2): AWG 19/10/28 TPC (0.75mm2)

 4 = Return Conductor Insulation 0.5mm RTI SPLE (natural)

 5 = Earth Conductor 1.0mm TPC (0.9mm2)

 6 = Aluminised Mylar Tape 15mm Width & 65 Micron Thickness

 7 = Outer Insulation 1.5mm RTI High Temp PVC

 

Working temperature: 105 Degrees Celsius

Working Voltage: 230V AC 50Hz

Cable Dia: 6.0mm

Cold Tail: 3.5m

 

Loading Design Specifications:

 1. We recommend the below design loadings and using the heating cable chart above.

Living Areas: 130-180W/m2. Bedrooms/Bathrooms/Hallways/Wooden Floors 100-150W/m2. The maximum load = 30W/Lm

2. The cable operating temperature should not exceed 105 Degrees Celsius

3. The cable must be kept clear of any thermal insulation and upper floor surfaces with a minimum clearance of 25mm

 

See thermostat control options

WattsLm LenghtElement ResCore ResAmps
450157.847.841.97
750252.822.823.26
9003058.781.963.91
12004044.081.105.21
15005035.270.716.52
21007025.190.369.13
24008022.040.2810.43
300010017.630.1813.04
360012014.690.1215.65